|
|
Electronic RLC meter
Dvořák, Radim ; Hanák, Pavel (referee) ; Lattenberg, Ivo (advisor)
This work deals with measurement methods of passive components R, L ,C used almost in every electrical circuit. Work describes progress of choosing the right methods for measurement and also the process of designing the autonomous RLC meter with use of ATMEL microprocessor chips. The RLC meter will be powered from rechargable battery and will be able to measure primary attributes of RLC components.
|
|
|
Inductive position sensor
Volf, Lukáš ; Vorel, Pavel (referee) ; Huták, Petr (advisor)
In the beginning is given an overview of sensors and their separation and properties. This work also deals deeper with inductive sensors. The work is designed for evaluation of the oscillator circuit (binary inductive sensor), its practical implementation, measuring the sensing range of different metals and measurement evaluation. For those interested, here is a list of literature.
|
|
|
The inverter for arc-welding
Vaculík, Josef ; Klíma, Bohumil (referee) ; Červinka, Dalibor (advisor)
This diplom thesis theoretically deals about principle of pulse welding current source. Work explains operation principle of the single acting transmit converter used in realized construction and mention the others examples of converters types. Goal of the work is design individual parts of source : input filter, pulse transformer, output inductor and power semiconductors components. Thesis also contains description of the regulation circuitry of the converter, auxiliary power supply and pre-driver for power transistors. If everything will be all right prototype of the source will be assembled and measured. Results will be compared with theoretical assumptions.
|
|
|
Influence of skin effect, proximity effect and air gap on winding losses of HF inductors and transformers
Pitner, Tomáš ; Cipín, Radoslav (referee) ; Martiš, Jan (advisor)
The bachelor's thesis deals with power losses in the windings of high-frequency inductors and transformers. A detailed mathematical and qualitative analysis of the skin effect, proximity effect and leakage flux of air gap is performed, supplemented with the results of computer simulations using the finite element method. The thesis introduces analytical and numerical methods for calculating power losses in the windings of inductors and transformers and describes suitable measurement methods, which are further used in the thesis. For selected geometries of inductors and transformers, AC resistances of their windings are calculated using FEM and the results are compared with measurements on constructed prototypes. The winding geometries are also compared between each other.
|
|
|
Energetic problems of induction electroheat equipments
Milka, Jiří ; Paar, Martin (referee) ; Lázničková, Ilona (advisor)
Induction heating is mostly used for melting metal materials in metallurgy. The principle of induction heating comes from electromagnetic induction which generates eddy currents heating the charge in electrically conducting material. The first part of the bachelor thesis is devoted to the principle of induction heating. Further, there are possibilities of applying the induction heating in electro heat devices mentioned. As the paper is focused on energy problems appearing when getting connected to the grid, the second part of the paper contains explanation – both theoretical and on examples - of compensation and symmetrization of induction electro heat devices.
|
|
|
DC/DC step-up converter for notebook
Škunda, Michal ; Klíma, Bohumil (referee) ; Červinka, Dalibor (advisor)
Given bachelor’s thesis devoted to a proposal and implementation of transducer STEP-UP for supplying of notebook in car. Introduction presents dividing of switching power supplies followed by a choice and a proposal of power supply. In this work we can find the specific proposal of inductor, the proposal of electronic connexion and the proposal of PCB layout. There is a software EAGLE used for the design of PCB layout. In the last part of work there are particular courses of current and voltage that characterize power supply pictured. The work contains measured load characteristic of switching power supply loaded by notebook as well. Notebooks need to have quality power supplies that is why there was a special attention paid to the quality of supply and its electric parameters.
|
|
| |
|
| |
|
|
Measurement of meteorological variables
Škorpík, Daniel ; Harabiš, Vratislav (referee) ; Chmelař, Milan (advisor)
This bachelor thesis discusses about the basic meteorological variables, especially temperature and airflow. These magnitudes are measured using an anemometer which uses resistive sensors, namely, two thermistors of NTC type that described technology, operations, methods of scanning, sensor placement and implementation of such a device. After that was designed block diagram and circuit diagram. The meter is realized, than we describe the individual components and then is calibrated and tested. In conclusion, it is evaluated for use in medicine.
|
|
|
Electronic ballast for sodium lamp
Eliáš, Jaroslav ; Vorel, Pavel (referee) ; Huták, Petr (advisor)
The aim is to get acquainted with the way the management and regulation of sodium lamps. This knowledge is then applied to design your own gear. The introductory section describes the basic characteristics of discharge light sources. Their behavior was verified by measuring and findings were used to create diagrams, mainly the control circuit. Theoretical design is developed by individual functional parts of the inverter.
|
guest ::
